Topcon GTS-100N Series Total Stations

The Green Label GTS-102N and GTS-105N of course still offer the well known Topcon quality and accuracy, making them a cost efficient investment. The Topcon GTS-100N series is available in a 2" and a 5" model. Both support 30x magnification and can store up to 24.000 points in internal memory in addition to Topcon’s onboard software. With its expanded full numeric keypad it is easy to input points and layout information including calculations. Contractors and grade setters can re-set stakes, check grade, topo and perform basic lay out. Backlit LCD and user definable display parameters are also standard. The GTS-100N is packaged with everything you need, and its ease of operation will keep it simple: set-up the instrument, record your points on the unit or any one of Topcon’s Field Controllers, and pack up. Getting the job done has never been this cost efficient.

Specifications: Telescope: Length, 150mm. Object lens diameter: 45mm (EDM: 50mm). Magnification: 30x. Resolving power: 3". Minimum focusing distance: 1.3m. Distance measurement: 1 prism: 200m; 3 prism: 2,700m; Accuracy: + (2mm + 2ppm x D) m.s.e. Measuring time: Fine mode: 1mm: 1.2 sec. (Initial 4 sec.); 0.2mm: 2.8 sec. (Intial 5 sec.). Coarse mode: 0.7 sec. (Initial 3 sec.). Tracking mode: 0.4 sec. (Initial 3 sec.). Tilt correction: Tilt sensor: single axis. Method: Liquid type. Compensating range: +3'. Correction unit: 1". Display: Display type: Dot matrix graphic LCD (160 x 64 dot). Keyboard: 24 keys. Battery life: Angle & distance measurement: 9 hours. Angle measurement only: 40 hours. Others: Serial signal connection: Yes. Bluetooth: No. Environmental protection: IP54. Internal data memory: 24,000 pts. Ambient temperature range: -20OC to + 50OC (-4OF to +122OF). Point guide: No. Plummet: Optical only.